FEATURES:
- Provides reliable and clear cell phone communication equivalent to the cell signal strength available outside the building.
- Simple Do-It-Yourself installation with no tools required allows the system to be installed anywhere.
- Wireless – no connections to cell phone.
- Multiple cell phone users (up to 20) & carriers simultaneously.
- Up to 500 SF coverage area.
- Requires 10’ separation between window antenna and repeater unit.
INCLUDES:
- 3 watt dual band 40dB gain cellular repeater unit with built in
- 9 dB antenna (# DA4000PR)
- 110 VAC power supply (# DP255)
- Window directional 9 dB gain antenna (# 426-PW)
- 15’ low loss DA240 coaxial cable with attached connectors (# 240-15NN)
4KPR-15R INSTALLATION INSTRUCTIONS:
The 4KPR-15R system operates with all North American cell carriers' voice and data networks operating on 850 and 1900 MHz. (NOT for use with iDEN, Nextel or Mike networks)
DO NOT CONNECT POWER UNTIL SYSTEM IS FULLY CONNECTED
1) A cell signal is REQUIRED at the location of the window antenna. Check cell signal by looking at the bars on your cell phone and by making and completing a call. You must be able to make and complete a call near the location of the window antenna. The window antenna (426-PW) should be placed at the location where the cell signal is the strongest.
- The window antenna should be placed on a clear section of glass and not behind metal or metal strips.
- If the window has tinting and the tinting may be removed in front of the window antenna.
2) After the location of the window antenna is selected, slide the window antenna into the window mount (DM426). Clean the window with window cleaner or an alcohol swab and secure the window mount with suction cups to the window.
- In homes with small children, suction cups should be removed and double sided adhesive tape should be used to permanently secure window mount.
3) Find a location for the DA4000PR repeater unit that faces into the room to cover the desired enhanced area. The DA4000PR unit must be located 8' away from the window antenna and facing into the room with the backside facing the window antenna.
- The DA4000PR unit must be located at least 8' diagonally from the window antenna
- The DA4000PR unit and window antenna CAN NOT be located above and below each other.
4) Open the 15' coaxial cable (240-15NM) and carefully uncoil to prevent kinds or twists. Securely attach the N type male connector to the N type female connector on the bottom of the window antenna. Attach the mini-UHF female connector to the DA4000PR repeater unit. Make sure connectors are lined up and securely hand tightened.
- Do not sharply bend or deform cable. Bends must have a radius great than 1 inch.
- Only use Digital Antenna 50 ohm coaxial cables.
- Extension cables and longer length cables available.
5) Only attach the electrical plug when the cable is connected to both the DA4000PR unit and the window antenna. Plug the DP255 AC adapter into the back of the DA4000PR unit and into a standard household 110 VAC electrical outlet. Only use the provided DP255 power supply.
Your system is now ready to use.
LIMITED WARRANTY
Digital Antenna, Inc warrants for one (1) year that its products sold hereunder will at the time of shipment be free from defects in material and workmanship and will conform to Digital Antenna's applicable specifications.
If products sold here under are not as warranted, Digital Antenna shall, at its option either repair or replace the product, provided proof of purchase and written notice of nonconformance are received by Digital Antenna within one (1) year of date of purchase and provided said nonconfirmation Products are, with Digital Antenna's written authorization, returned in protected shipping containers.
This warranty shall not apply for Products Digital Antenna determined to have been, by Customer or otherwise, subjected to mishandling, misuse, neglect, improper testing, repair alteration, damage, assembly or processing that alters physical or electrical properties.
